| 
| 
| 
| 
|
RIGCONTROL Software | ||||
|---|---|---|---|---|
| Title | SubSection | Released | Brief Description | |
| Aor Plot | 0.9 2006/01/01 |
Multi platform Tcl/Tk spectrum plotting software for AOR 8200/8600 receivers. | ||
| Aor8000 | 0.12 1998/09/20 |
Control programs for the AOR-8000 scanning receiver using Tcl/Tk (for the X version) and the console (This is of interest to AOR-8000 scanner owners). | ||
| Aor8200write | none 1999/08/29 |
AorWrite is short commandline tool to communicate with AOR-AR8200 handheld | ||
| BC246T Virtual Control | 0.8d 2007/02/26 |
This is a little program to control and display the activity on the BC246T via the serial port. | ||
| BC780XLT | 0.2 2002/02/02 |
The Uniden BC780XLT Display Tool creates a little X GUI that displays freq, talkgroup, channel tag, bank tag, and current signal strength. It also includes some basic controls for the radio functions which are most likely to be used while monitoring. | ||
| FT100 Rig Control | Other | 0.0.7 2000/03/20 |
A pair of programs to control the FT100 transciever. | |
| Grig | 0.7.2 2006/12/17 |
Grig is a simple Ham Radio control (CAT) program based on the Ham Radio Control Libraries (Hamlib). It is intended to be highly generic presenting the user to the same graphical user interface regardless of which radio is being controlled. | ||
| Hamlib | drivers | 1.2.9 2009/02/26 |
A stable, flexible, shared control library for receivers, scanners, amateur radio transceivers and rotators. | |
| Icom | 1998/07/09 |
This program controls ICOM radio transceivers and receivers with the CI-V option. | ||
| icomctrl | Other | 0.6 1999/10/16 |
31-Jul-07: Moved to Obsolete. Link broken. | |
| Icomlib | 1.0.1 2000/04/01 |
Control suite for the PCR-1000 ICOM receiver. | ||
| Icq7com | 0.8 2000/05/14 |
icq7com is a utility for the Icom IC-Q7 mini handheld transceiver. It enables complete backup of its memory, downloading, editing and uploading of channels. | ||
| KachinaCAT | Other | 1.26 2007/09/30 |
Control program for the Kachina 505DSP transceiver with both Linux and Windows versions. This program replaces the Kachina-supplied KC505.EXE (Windows only) for most operating functions, and it is still evolving. | |
| KComm | 1.1 2008/06/11 |
Communication and logging program for Elecraft K2 and K3 transceivers. | ||
| Kct | drivers | 0.02 2000/01/07 |
The KCT/T is a PC-bus 8bits ISA board to drive two antenna rotors and two radios. | |
| KenTCL | utils | 1.1 1999/12/16 |
A control program for the Kenwood TS-140/440/940 line of amateur radio transceivers that runs under Linux and Windows using the exact same source file. | |
| KT7F | utils | 0.6 2001/12/07 |
KT7F is a graphical control interface for the T7F transceiver (see http://www.df2fq.de) | |
| kt7f | 0.6 2001/11/24 |
A frequency setup program for the T7F Data-Tranceivers. | ||
| LiNRADiO | terminal | 0.9.1 1999/09/28 |
Three programs to control WiNRADiO communications receivers. | |
| Marote | 3.1 2006/08/22 |
Elecraft K2 GUI based rig control program. Requires Qt 3.x. | ||
| OCTL | 0.10 2004/03/16 |
A Python program to interrogate the Ten-Tec ORION transceiver and replicate the LCD panel using the curses package. | ||
| OPSK | 0.20 2006/02/18 |
Provides band and passband controls to be used in conjunction with a waterfall display to easily focus on PSK31 signals. Specific to the Orion, but can be adapted to other rigs. | ||
| Rigserve | 0.21 2007/02/16 |
Rigserve is an IP-based server that controls your ham rigs and listens for client connections. Human readable text commands can be sent by Telnet or (preferably) specialized client software. Inspired by Hamlib, but written entirely in Python under Linux. Should also run on Windows. Initial support for Ten-Tec Orion and Icom R8500. Development now hosted on sourceforge.net. | ||
| RX320 controller | 0.6.2 2006/09/11 |
This is a controller program to use with the Ten Tec RX 320 radio. | ||
| sctl | Other | 0.0.3 2003/03/11 |
sctl is a program to control the Bearcat BC895 xlt trunking scanner, and possibly others. | |
| Syntorxgen | 1.50rel 2010/02/01 |
Syntorxgen generates code plugs (i.e. sets of channel settings for frequency, PL, etc.) for Motorola Syntor X transceivers. | ||
| tk10 | 0.4 2004/08/24 |
tk10 is configuration software for the ICOM IC-R10 receiver. It employs a graphical user interface and works on Linux, MacOS X, BSD, Windows, etc. | ||
| tk120 | 0.9 2005/09/28 |
tk120 is a utility program for programming or cloning the Yaesu VR-120 handheld receiver. | ||
| tk150 | 1.3 2002/10/25 |
tk150 is a utility program for programming or cloning the 1000 channel Standard (Yaesu) VR-150 handheld receiver sold in Japan. | ||
| tk2 | 1.1 2004/03/30 |
tk2 is an open source, multi-platform configuration program for the ICOM IC-R2 portable receiver. | ||
| tk3 | 0.3 2002/10/21 |
tk3 is an open source, multi-platform configuration program for the ICOM IC-R3 portable radio/television receiver. | ||
| tk5 | 0.6 2004/12/15 |
tk5 is configuration software for the ICOM IC-R5 receiver. It employs a graphical user interface and works on Linux, MacOS X, BSD, Windows, etc. | ||
| tk500 | 1.5 2004/01/16 |
tk500 is a utility program for programming or cloning the Yaesu VR-500 receiver. | ||
| tk545 | 1.4 2002/10/29 |
tk545 is open source software for controlling and programming the Japan Radio Co. NRD-545 DSP receiver. | ||
| tk7 | 0.5 2003/05/19 |
tk7 is an open source, multi-platform configuration program for the ICOM IC-Q7A walkie-talkie. | ||
| tk75 | 0.4 2004/11/26 |
tk75 is open source software for controlling and programming the ICOM IC-R75 shortwave receiver. | ||
| tk8500 | 0.9 2003/11/16 |
tk8500 is open source software for controlling and programming the ICOM IC-R8500 wide coverage receiver. | ||
| tk92 | 0.7 2002/12/24 |
tk92 cloning software for Radio Shack PRO-92, PRO-2067 scanners. | ||
| Tkd7 | 1.33 2002/11/23 |
tkD7 is an expectk script for controlling the Kenwood TH-D7 HT. It can control basic transceiver operation, set various radio parameters, set memories, and display APRS data very crudely. It has been run on FreeBSD and Linux but should be portable to any system that supports TCL/TK and Expect. | ||
| TS440 | 0.9 2004/05/21 |
Linux GTK Program to control the kenwood TS440. | ||
| tt516 | Other | 0.1 2004/01/28 |
tt516 is a rig control command-line client for the Ten Tec Argonaut V (Model 516) HF amateur radio transceiver | |
| Vxu | 0.5.0 2003/09/19 |
Vxur and vxuw are command line utilities that allow reading and writing the memory of the Yaesu/Vertex Standard VX-5R HT and FT-817/FT-857 in "clone" mode. | ||
| WinRADiO toolkit for Linux | terminal | 0.1 1999/10/24 |
A TCL based graphical interface to the WinRadio communications receivers. | |
| Yaesu/KG0CQ | 0.13 2004/07/28 |
Archaic program to control a Yaesu FT-890 HF transceiver off of a serial port. | ||
| Yaesu/OH2LWO | 0.2alpha 1998/05/08 |
Software to program Yaesu HTs FT-50 and VX-1. | ||
 |
| Hosted by Linux Australia |